Front Bumper for Land Rover Discovery Series I and Series II
Both bumpers are made using a combination of 1/4″ and 3/16″ steel plate. No modifications to the vehicle is required. For the Disco 1 you can optionally cut your stock front end caps and mount them onto the top of the bumper for a smoother finish. This is shown in the pictures below. The bumpers can be made to take any winch you choose, but we recommend you avoid winches with integrated solenoids, as you will have to cut your grill to make them fit. Both bumpers bolt directly to the frame using over 10 bolts and follow along the front frame horns under the vehicle. The mounting method utilized is far superior than using just the stock mounting locations. The bumper features the following:
- Increased approach angle
- Pre-drilled for mounting of winch
- All mounting hardware
- Optional diamond plate or regular sheet metal for top of bumper. Aedofab recommends using diamond plate for additional traction if you utilize spotters on your bumpers from time to time in off-camber situations.
Discovery Series I Front Bumper. $730 + shipping. Options are priced as stated:
- $65 – Optional Dual Clevis Mounts
- $225 – Optional Brush Guard (Similar to Disco II brush guard below)
- $10 – Optional auxiliary lighting tabs on brush guard
- $75 – Optional tabs for limb risers
- $125 for paint – contact us for pricing on powder coating.
Discovery Series II Front Bumper. $730 + shipping. Options are priced as stated:
- $65 – Optional Dual Clevis Mounts
- $225 – Optional Brush Guard
- $10 – Optional auxiliary lighting tabs on brush guard
- $75 – Optional tabs for limb risers
- $125 for paint – contact us for pricing on powder coating.
Please contact us for pricing. Pricing does not include shipping charges. More pictures of the Disco I and Disco II bumpers follow. Click on images for a larger picture.